8E6259, 8E-6259 J225 J250 J300 Lock Retainer

8E6259, 8E-6259 J225 J250 J300 Lock Retainer, CAT Sleeved Retainer Pin Washer, Replacement Caterpillar Bucket Sidebar Protector pin lock, Ripper Teeth Pins & Retainers & Washers Locking Device, Fastener & Hardware Accessories Spare Parts fits CAT Tooth System, Loader & Excavator Bucket Teeth Adapter Lock Flex Pin, Wear Parts GET Parts China Supplier

8E6259, 8E-6259 J225 J250 J300 Lock Retainer ,  Part No.  8E6259, 3G9609, 8E-6259, 3G-9609    pin retainer washer lock Suitable for Bucket Tooth & Adapter, used in Excavator, Digger, Wheel Loader, Skid Steer, Backhoe Loader, Scraper, Bulldozer China Wholesale Price Buy Bucket teeth pins, Caterpillar  genuine, new aftermarket parts with delivery, aftermarket, replacement and not original CAT.

All Caterpillar GET Parts are produced to the highest industry standard to ensure our customers receive optimum life form our Spare parts.

Caterpillar style washer for J250 and J300 series bucket teeth.

COMPATIBLE MODELS FOR PART NUMBER 8E-6259
WHEELED EXCAVATOR
M318 M315GC M313C M313D M314F M315C M315D2 M315F M316C M317D2 M317F M318C M318C MH M318D M318D MH M320 M320D2 M322C M315
WORK TOOL
BUCKET
INTEGRATED TOOLCARRIER
IT12 IT12B IT14B IT14F IT18 IT18B IT18F IT28 IT28B IT28F IT38G II IT38H
MINI HYDRAULIC EXCAVATOR
305.5 GC 308 308.5 308D 308E 308E CR 308E SR 308E2 308E2 CR 308E2 SR 308E2CR 308E2SR 309 310 305.5E 305.5E2 305E2 305E2 CR 306 306.5 306E 306E2 307 307-A 307.5 307B 307E 307E2
WHEEL-TYPE LOADER
916 918F 926 926E 928F 936 936E 936F 938F 938G 938G II 938H 950 GC 950B 950B/950E 950E 950F 950F II 950G 950G II 950H 950M 960F 962G 962G II 962H G916 G926 G936
WHEEL TRACTOR-SCRAPER
613C 615C 623E 623F 623G
EARTHMOVING COMPACTOR
825 825C
EXCAVATOR
320 307D 326 323 313 GC 312 GC 312 GX 313 GX 316 GC 316 GX 313 308C 311-A 311B 311C 311D LRR 311F LRR 312-A 312B 312B L 312C 312C L 312D 312D L 312D2 312D2 GC 312D2 L 312E 312E L 312F 312F GC 313B 313D 313D2 313D2 GC 313D2 LGP 313D2-GC 313F L 313F LGC 314C 314D CR 314D LCR 314E CR 314E LCR 314F CR 315 315-A 315-A L 315B 315B FM L 315B L 315C 315D L 315F LCR 316E L 316F L 317 N 317-A 317-A N 317B L 317B LN 318B 318B N 318C 318D L 318D2 L 320 GC 320 L 320-A 320-A L 320-A N 320-A S 320B 320B FM LL 320B L 320B LL 320B N 320B S 320C 320C L 320D 320D L 320D LRR 320D RR 320D2 320D2 GC 320E 320E L 320E LRR 320E RR 320F L 320N 321B 321D LCR 322 L 322 LN 322-A 322-A L 322-A LN 322-A N 322B 322B L 322B LN 322C 322N 323F L 323GC 324D L 324E 324E L 325 L 325 LN 325-A 325-A FM L 325-A L 325-A LN 325B L 325B LN 325C 325D L 325F 325F LCR 326D2 326D2 L 326F 326F L 326F LN 329D L 329E 329E L 329F L 330-A 330-A L 330B L 330B LN 330C 330D2 L 330F 330F L 345D L E110B E120B E240C EL240C M312 M315 M318 215 215B 215C 215D 219 219D 225 235 235B 235C 235D 245D 307 307-A 307C 307B
BACKHOE LOADER
416D 420D 430D 446 446B 446D 450 450E 450F
TRACK-TYPE LOADER
931C II 933 933C 935C II 943 953 953B 953C 955L 963 963B 963C

Engine exhaust contains products of combustion which may be harmful to your health. Always start and operate the engine in a well ventilated area and, if in an enclosed area, vent the exhaust to the outside.
For initial start-up of a new or rebuilt engine, and for start-up of an engine that has been serviced, make provision to shut the engine off should an overspeed occur. This may be accomplished by shutting off the fuel supply and/or the ignition to the engine. Cat J300 Retainer 8E6259 China Factory
Note: Using the “EMERGENCY STOP” button will shut off both the fuel and the ignition.Do not start the engine or move any of the controls if a “DO NOT OPERATE” tag is attached to the start switch or controls. Do not start the engine or move any of the controls if there is a similar warning tag attached to the start switch or controls.Ensure that no one will be endangered before the engine is started and when the engine is started.Perform the procedures that are described in this Operation and Maintenance Manual, “Before Starting Engine” (Operation Section).Purging Unburned Gas
Unburned gas in the air inlet and exhaust system may ignite when the engine is started. Personal injury and/or property damage may result.Before starting an engine that may contain unburned gas, purge the unburned gas from the air inlet and exhaust system. Refer to the topic on purging unburned gas in the “Starting the Engine” section.  8E6259 Pin Lock suitable for CAT Tooth J250 J225 J300
The following events cause unburned gas to remain in the air inlet and in the exhaust manifold:
Emergency stop
Engine overspeed
The engine control is set to the STOP mode and the gas shutoff valve does not close.
Unsuccessful successive attempts to start the engineUnburned gas may remain in the air inlet and exhaust system after several unsuccessful attempts to start the engine. The unburned gas may increase to a concentration that may ignite during a successive attempt to start the engine.Perform the following procedure in order to purge the unburned gas:
If the Cat Electronic Technician (ET) is not connected to the engine, connect Cat ET to the engine.
Verify that the value of the “Engine Purge Cycle” parameter is equal to 10 seconds less than the value of the “Crank Cycle” parameter.
Set the engine control to the START mode. The engine will crank for the “Engine Purge Cycle” time. Then, the gas shutoff valve will be energized and the ignition will be enabled. The engine will start.
Continue with your previous procedure. Automatic Starting Lock Retainer
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode. Lock Retainer
If the engine control switch is in the “AUTO” position, the engine will automatically start when the remote start/stop initiate contact closes.Parameters for the Start/Stop Control Lock Retainer