Caterpillar Grader Teeth 6Y5230, Caterpillar Motor Grader Attachment, CAT style Scarifier Bucket Teeth, Casting / Forging Scarifier Shank Tooth, Caterpillar Motorgrader Aftermarket OEM Replacement Grader Scarifier Protection Parts, Scarifier Ripper Shank System, Ripper boots OEM Aftermarket GET Spare Parts China Supplier
Caterpillar Grader Teeth 6Y5230, Buy Scarifier & Ripper Shank and Tips 5B0946 , 5B-0946 , 2D5572, 6Y5230, 2D-5572, 6Y-5230, 1C6011, 1C-6011 Caterpillar genuine, new aftermarket excavator dozer grader motorgrader parts with delivery.
Compatible equipment models 6Y5230:
MOTOR GRADER 120B 120G 12E 12F 12G 130G 140B 140G 14E 160G
WHEEL LOADER 950 Caterpillar
Tungsten Coating Overlay on Scarifer Tips will provide an extremely durable, abrasion resistant surface on most types of ground engaging tools where a high level of impact resistance is required. Tungsten Coating allows you to experience the hardness of tungsten without the brittleness that is associated with traditional brazed tungsten. It is most effective in slide and abrasion wear situations.
Brand: CATERPILLAR
Type:Ground engaging, Teeth, Stk, Class 22000
Interchange number:6Y5230, 1C6011, 5B0946, 2D5572HX, 1957234, H73, 195-7234
Equipment:ENGINE – MACHINE, MOTOR GRADER
Model:3304, 3306, 12G, 130G, 140G, 160G
Caterpillar style scarifier bucket tooth Advantage:
1. Aggressive leading edge design
2. Variety of approved tooth systems
3. More Side cutters / Wear shroud options
4. Reduced weight by the use of high abrasion resistant materials
5. More usable wear metal for longer point life
6. Slimmer profile for better penetration
7. Greater nose strength and fatigue life
8. Alloys provide longer wear life and greater impact resistance
The importance of correct ripper boot selection
Selecting the correct ripper boot has a major flow-on effect to the performance of your entire machine, as well as the productivity of your operation and output.
If you are using the wrong ripper boot for the application or digging conditions, you face reduced material penetration, ripper tip and shank breakage, and damage to the ripper frame including pins and bushes. Hensley Scarifier Tooth 2D5572HX
Increased resistance will also significantly affect areas such as fuel consumption and increase the wear on the drivetrain and track components.
This premature wear and associated breakages will result in downtime spent replacing parts outside of regular service windows, which can cost hundreds of dollars per hour. 1C6011, 1C-6011 Aftermarket CAT Motorgrader Tooth Scarifier
In fact, the cost of replacement parts and components is often minimal in comparison to the cost of scheduling time and resources for fitters to perform the extra work, in conjunction with production downtime of the machine and other dependent equipment. Grader Scarifier Point 195-7234, 2D5572HX, 2D5572HD
And, if your parts are breaking, supply chains and logistics can also be impacted if you are required to carry extra stock of replacement parts to support operations.Caterpillar Scarifer Tooth 6Y5230
The ECM determines the engine speed by measuring an electrical signal from the speed/timing sensor. The sensor is located on the flywheel housing. The sensor is next to the left camshaft drive gear. If engine speed exceeds the trip point, an operator warning is given. The warning will remain active until the engine speed drops below the hysteresis. The peak engine overspeed is logged in the permanent ECM memory. The peak engine overspeed is logged as a histogram in order to quantify the magnitude of the engine overspeed. The histogram provides information in order to assess the potential level of engine damage. Factory passwords are required to clear this information.Air Inlet Restriction Tungsten Coating Overlay Scarifer Tip Tooth
